BMT-38 is capable of making a hole up to 38mm and the diameter is 106mm. The spindle nose to table and spindle nose to base distance is 625mm and 1000mm respectively. It is provided with MT.4 taper in spindle and the spindle speed is 70x2000 rotations per minute. It is designed with 415x415mm table size and 400x350mm of base size to make it convenient for making hole broad range of materials. The spindle travel distance is 225mm and the length is 1425mm. This device weights about 300kgs.
BMTL-38’s making hole capacity is similar to that of BMT-38 and it differs in the following specifications such as 121mm of diameter, 830mm spindle nose to table distance, and 1000mm of spindle nose to base distance. It is designed with MT.4 tapper in spindle. The spindle speed is 70X2000 similar to that of BMT-38. The table size and base size are 400x400mm and 415x350mm respectively. The spindle travel is slightly higher than that of BMT-38. The height is about 1450mm and the device weighs approximately 325kgs.