We have 8 different models of sheet bending component with different machining capacities.
PMS-1 : This bending machine model is 100x33x42 inches in size and diameter of the screw is 4 inch. Metal sheet plates which are up to 16mm thickness over side can be fed easily for bending purpose and this machine has 12x2 % solid Ram. All the sheet bending machine models are provided with cross-sectional blade and PMS-1 has 6x 5/8 inch cross sectional blade, 4x4 inch size bar, 12x6 Girder. The bending length is 100 inches and 15 inches of center distance is available. The Sheet bending capacity in terms of thickness is 10 SWG.
PMS-2 : This model is 96x31x42 inch in size and screw diameter is 4 inch. 16 mm of thickness of metal sheet plate can be used. Ram, girder, bar size, number of sits and cross sectional blade size is similar to that of the above model. 96 inch of bending length can be obtained. Bending capacity is 10 SWG.
PMS-3 : It is 96x31x41 inches in size and equipped with 3*1/2 inch of screw diameter and the thickness of metal sheet plate that can be used in 12 inch. Cross sectional blade is 6x1/2 inch and size of the bar is 3*1/2x3*1/2 inch. The length of the bending operation is 96 inch and bending capacity is 12 inch.
PMS-4 : The overall size of this model is 84x31x41 and diameter of the screw is similar to that of PMS-3. Except 84 inch capacity of bending length all other specifications including Ram, cross sectional blade, bar size, girder, center distance and sheet bending capacity are similar to that of PMS-3 model sheet bending machine.
PMS-5 : This model is exclusive in terms of 3*1/8 inch screw diameter, 10mm metal sheet thickness, 12x3 inch hollow ram 5x5/8 inch cross sectional blade, 3x1/8x3x1/8 inch bar size, 11 inch center distance and 14 inch thickness sheet bending capacity.
PMS-6 : This model contains overall size of this model is about 84x30x40 inch and screw diameter of 3*1/8 inch. The maximum thickness of metal sheet that can be processed with the help of this model is 10mm. It has been equipped with cross sectional blade of 5x5/8 inch. Up to 14 inch of bending thickness can be obtained with this model.
PMS-7 : The overall size of this machine is 96x28x39 inch. Diameter of the screw is 2*3/4 inch and bending thickness that can obtain with this model is 16mm.
PMS-8 : This machine is same in size as that of PMS 8 and the screw diameter and thickness of metal sheet plate that can be used is similar to that of PMS 7. The maximum bending capacity is 16mm.