All Geared Heavy Duty Lathe – 2050 Series

Model : 2050 Series

Features:

  • High Tensile Casting
  • Head Stock Latest Design
  • Bed & Spindle are Hardened & Ground
  • Lathe bed is of grade 20 castings, duly flame hardened & ground with Brinel hardness over 300 BHN
  • Head stock gears are of special alloy case hardening steel and are duly hardened and profile grounded.
  • Head stock spindle is ground and runs in one anti friction taper roller bearings in front wall of head stock and one taper roller bearing in rear side wall of head stock.
  • Norton gear box and apron gear box are oil bath and gears are splash lubricated.
  • Quick change Norton gear box provides for wide range of British and Metric threads
  • Accuracy tested as per IS : 1878 ( part – 1 ) 1971
  • Lead screw, starting shafts are different.
  • Control panel for on / off the machine, reverse / off / forward start handle is given along with apron gear box for easy control.
Models20502050 (OPTIONAL)
Type of bedFlat & V ( Gap Bed )Flat & V ( Gap Bed )
Width of bed325 mm325 mm
Height of center254 mm305 mm
Swing over bed484 mm595 mm
Swing over saddle360 mm460 mm
Swing over cross slide292 mm395 mm
Swing in gap800 mm900 mm
Length of gap in front of face plate200 mm200 mm
No. of spindle speed88
Spindle speed range30- 1235 rpm30-1235 rpm
Spindle bore52 mm52 mm
Spindle noseThreaded/A2 Size 6Threaded/A2 Size 6
Lead screw diameter / pitch38.1 mm/4 TPI38.1 mm/4 TPI
Tail stock spindle diameter63.5 mm63.5 mm
Taper in tail stock quillMT-4MT-4
Cross slide travel265 mm315 mm
Compound slide travel140 mm140 mm
Tool post square150 x 150 mm150 x 150 mm
Tool shank size25 x 25 mm25 x 25 mm
MODEL2050/12050/22050/32050/42050/52050/6
Length of Bed1675mm2130mm2730mm3030mm3630mm4230mm
Admit Between Centre555mm1015mm1610mm1910mm2500mm3100mm
Motor Power3 HP3 HP3 HP3 HP5 HP5 HP
Floor Space - L x W2595 x 1200mm3050 x 1200mm3650 x 1200mm3950 x 1200mm4550 x 1200mm5150 x 1200mm
Net Weight1250 Kg.1400 Kg.1600 Kg.1700 Kg.1900 Kg.2100 Kg.
Gross Weight1450 Kg.1600 Kg.1800 Kg.1900 Kg.2100 Kg.2350 Kg.

Standard Accessories :

  • Chuck Plate
  • Gear Set
  • Centre Adaptor
  • Dead Centres
  • Dial Indicator
  • Square Tool Post
  • Electrical Fittings
  • Tool Post Key

Optional Accessories :

  • Steady Rest
  • Follow Rest
  • Face Plate
  • True Chuck & Dog Chuck
  • Rear Tool Post

  • Quick Change Tool Post Tapper Turning Attachment
  • Coolant Pump with Tank & Fittings Machine Lamp
  • Key Way Milling Attachment
  • Tool Post Grinder