All Geared Heavy Duty Lathe – 3050 Series

Model : 3050


  • High Tensile Casting
  • Head Stock Latest Design
  • Bed & Spindle are Hardened & Ground
  • Lathe bed is of grade 20 castings, duly flame hardened & ground with Brinel hardness over 300 BHN
  • Head stock gears are of special alloy case hardening steel and are duly hardened and profile grounded.
  • Head stock spindle is ground and runs in one anti friction taper roller bearings and one needle roller bearings ( 32222 & N 222 ) in front wall of head stock and one taper roller bearing ( 32220 ) in rear side wall of head stock.
  • Head stock , universal Norton gear box and apron gear box are oil bath and gears are splash lubricated.
  • Universal Norton gear box provides for wide range of British and Metric threads
  • Accuracy tested as per IS : 1878 ( part – 1 ) 1971
  • Lead screw , starting shafts are different.
  • Control panel for on / off the machine , reverse / off / forward start handle is given along with apron gear box for easy control.
Type of bedFlat & V ( Gap Bed )
Width of bed375 mm
Height of center330 mm
Swing over bed630 mm
Swing over saddle500 mm
Swing over cross slide440 mm
Swing in gap920 mm
Length of gap in front of face plate220 mm
No. of spindle speed8
Spindle speed range20 - 835 rpm
Spindle bore80 mm
Spindle noseA2 Size 8
Lead screw diameter / pitch38.1 mm/4 TPI
Tail stock spindle diameter75 mm
Taper in tail stock quillMT-4
Cross slide travel330 mm
Compound slide travel180 mm
Tool post square150 x 150 mm
Tool shank size32 x 32 mm
Model 3050/13050/23050/33050/43050/53050/63050/7
Length of bedmm2130273030303630423048305430
Admit between centersmm900150018002400300036004200
Floor space L x Wmm3050x 13003650x 13003950x 13004550x 13005150x 13005750x 13006350x 1300
Net weightKg1800200022002600300034003800
Gross weightKg2000220024002800320036004000

Standard Accessories :

  • Chuck Plate
  • Gear Set
  • Centre Adaptor Dead Centres
  • Dial Indicator
  • Square Tool Post
  • Electrical Fittings
  • Tool Post Key

Optional Accessories :

  • Steady Rest
  • Follow Rest
  • Face Plate
  • True Chuck & Dog Chuck
  • Rear Tool Post

  • Quick Change Tool Post Tapper Turning Attachment
  • Coolant Pump with Tank & Fittings Machine Lamp
  • Key Way Milling Attachment
  • Tool Post Grinder