CDS-C Series – All Geared Lathe

Model : CDS6250C,...
ModelsCDS6250CCDS6256CCDS6266CCDS6276C
Main Specification
Max.Swing over Bed500mm560mm660mm760mm
Max.Swing over Carriage290mm350mm440mm540mm
Max. Swing in Gap760mm780mm870mm965mm
Admit Between Center1000mm / 1500mm / 2000mm / 3000mm1000mm / 1500mm / 2000mm / 3000mm1000mm / 1500mm / 2000mm / 3000mm1000mm / 1500mm / 2000mm / 3000mm
Width of Bed394mm394mm394mm394mm
Head Stock
Spindle NoseD-8D-8D-8D-8
Spindle Bore105mm105mm105mm105mm
Taper of Spindle Bore110 mm / 1:20110 mm / 1:20110 mm / 1:20110 mm / 1:20
No.Spindle Speed16 Speeds16 Speeds16 Speeds16 Speeds
Range of Spindle Speed26-1700rpm26-1700rpm26-1700rpm26-1530rpm
Thread & Feed
Range of inch Thread7/16 - 80 TPI7/16 - 80 TPI7/16 - 80 TPI7/16 - 80 TPI
Range of Metric Thread0.35 - 80mm0.35 - 80mm0.35 - 80mm0.35 - 80mm
Range of Module Thread0.2 - 40mm0.2 - 40mm0.2 - 40mm0.2 - 40mm
Range of Di metrical pitch thread7/8 - 160 DP7/8 - 160 DP7/8 - 160 DP7/8 - 160 DP
Longitudinal Feed0.044 - 1.48mm/rev0.044 - 1.48mm/rev0.044 - 1.48mm/rev0.044 - 1.48mm/rev
Cross Feed0.022-0.74mm/rev0.022-0.74mm/rev0.022-0.74mm/rev0.022-0.74mm/rev
Rapid Traverse - Longitudinal4.0m/min.4.0m/min.4.0m/min.4.0m/min.
Rapid Traverse - Cross1.5m/min.1.5m/min.1.5m/min.1.5m/min.
Max. Travel of Cross Slide348mm348mm355mm355mm
Max. Travel of Top Slide150mm150mm150mm150mm
Tool Shank Size25x25mm25x25mm25x25mm25x25mm
Tailstock
Taper of Tailstock QuillM5M5M5M5
Travel of Tailstock Quill150mm150mm150mm150mm
Diameter of Tailstock Quill75mm75mm75mm75mm
Motor
Power of main motor10HP10HP10HP10HP
Power of Rapid Traverse motor0.5HP0.5HP0.5HP0.5HP
Power of coolant motor0.125HP0.125HP0.125HP0.125HP
Weight & Dimensions
Net Weight :1000mm2100kg.2150kg.2200kg.2450kg.
1500mm2150kg.2200kg.2250kg.2500kg.
2000mm2250kg.2310kg.2360kg.2600kg.
3000mm3030kg.3080kg.3150kg.3500kg.
Dimensions(L x W x H) :1000mm2850x1100x1900mm2850x1100x1900mm2850x1100x1900mm2850x1100x1900mm
1500mm3350x1150x1900mm3350x1150x1900mm3350x1150x1900mm3350x1150x1900mm
2000mm3850x1150x1900mm3850x1150x1900mm3850x1150x1900mm3850x1150x1900mm
3000mm4580x1150x1900mm4580x1150x1900mm4580x1150x1900mm4580x1150x1900mm

Standard Accessories :

  • 3 jaw Chuck
  • Steady & Follow Rest
  • Fixed Center(spindle)
  • Center Sleeve
  • Dead center 2 No.
  • Full Length splash guard

  • Coolant system & Tank
  • Machine Lamp
  • Chuck Guard
  • Carriage Guard
  • Instruction Manual
  • Tool Kit

Optional Accessories :

  • 4 jaw Chuck
  • Face Plate
  • Drive Plate
  • Quick change Tool Post
  • Taper Turning Attachment
  • Anti vibration pads
  • Digital Readout
  • Thread chasing dial
  • Revolving center