CW-E Series – All Geared Lathe

Model : CW6263E, CW6280E, CW6210E
ModelsCW6263ECW6280ECW62100E
Main Specification
Max.Swing over Bed630mm800mm1000mm
Max.Swing over Carriage350mm520mm720mm
Max. Swing in Gap800mm1000mm1230mm
Admit Between Center1000 / 1500 / 2000 / 3000 / 4000 / 5000mm1000 / 1500 / 2000 / 3000 / 4000 / 5000mm1000 / 1500 / 2000 / 3000 / 4000 / 5000mm
Width of Bed550mm550mm550mm
Head Stock
Spindle Nose
Spindle Bore105/130mm105/130mm105/130mm
Taper of Spindle Bore120mm(1:20) / 140mm(1:20)120mm(1:20) / 140mm(1:20)120mm(1:20) / 140mm(1:20)
No.Spindle Speed18 Speeds18 Speeds18 Speeds
Range of Spindle Speed7.5-1000rpm7.5-1000rpm7.5-1000rpm
Thread & Feed
Range of inch Thread1-14TPI1-14TPI1-14TPI
Range of Metric Thread1-240mmm1-240mmm1-240mmm
Range of Module Thread0.5 - 120MOD0.5 - 120MOD0.5 - 120MOD
Range of Di metrical pitch thread1-28DP1-28DP1-28DP
Longitudinal Feed0.10-24.30mm/rev.0.10-24.30mm/rev.0.10-24.30mm/rev.
Cross Feed0.05-12.15mm/rev.0.05-12.15mm/rev.0.05-12.15mm/rev.
Rapid Traverse - Longitudinal3.8m/min.3.8m/min.3.8m/min.
Rapid Traverse - Cross1m/min.1m/min.1m/min.
Max. Travel of Cross Slide445mm493mm493mm
Max. Travel of Top Slide200mm200mm200mm
Tool Shank Size30x30mm30x30mm30x30mm
Tailstock
Taper of Tailstock QuillM6M6M6
Travel of Tailstock Quill240mm240mm240mm
Diameter of Tailstock Quill100mm100mm100mm
Motor
Power of main motor15HP15HP15HP
Power of Rapid Traverse motor1.5HP1.5HP1.5HP
Power of coolant motor0.125HP0.125HP0.125HP
Weight & Dimensions
Net Weight :1000mm3550kg.3730kg.4050kg.
1500mm3850kg.4030kg.4350kg.
2000mm4150kg.4330kg.4560kg.
3000mm4620kg.4830kg.5150kg.
4000mm5450kg.6100kg.6250kg.
5000mm6250kg.6450kg.6750kg.
Dimensions(L x W x H) :1000mm3390x1100x1920mm3390x1300x1920mm3390x1400x1920mm
1500mm3900x1100x1920mm3900x1300x1920mm3900x1400x1920mm
2000mm4400x1100x1920mm4400x1300x1920mm4400x1400x1920mm
3000mm5400x1100x1920mm5400x1300x1920mm5400x1400x1920mm
4000mm6400x1100x1920mm6400x1300x1920mm6400x1400x1920mm
5000mm7400x1100x1920mm7400x1300x1920mm7400x1400x1920mm

Standard Accessories :

  • 3 jaw Chuck
  • Steady & Follow Rest
  • Fixed Center(spindle)
  • Center Sleeve
  • Dead center 2 No.
  • Full Length splash guard

  • Coolant system & Tank
  • Machine Lamp
  • Chuck Guard
  • Carriage Guard
  • Instruction Manual
  • Tool Kit

Optional Accessories :

  • 4 jaw Chuck
  • Face Plate
  • Drive Plate
  • Quick change Tool Post
  • Taper Turning Attachment
  • Anti vibration pads
  • Digital Readout
  • Thread chasing dial
  • Revolving center