CW-H Series – Extra Heavy Duty Lathe

Model : CW61125H,...
Main Specification
Max. Swing Over Bed1240mm1440mm1640mm1840mm2040 mm
Max. Swing Over Carriage900 mm1050mm1250mm1450mm1650mm
Max. Turning Length1000-12000mm1000-12000mm1000-12000mm1000-12000mm1000-12000mm
Max. Weight of Work Piece15000Kg.15000 Kg.15000Kg.15000 Kg.15000Kg.
Width of Bed1100mm1100mm1100mm1100mm1100mm
Head Stock
Spindle noseA2-15A2-15A2-15A2-15A2-15
Spindle bore130mm130mm130mm130mm130mm
Taper ofSpindle boreMetric 140Metric 140Metric 140Metric 140Metric 140
No, of Spindle Speed21/12-Speeds21/12-Speeds21/12-Speeds21/12-Speeds21/12-Speeds
Range ofSpindle Speeds3.15-315rpm/3.5-290rpm3.15-315rpm/3.5-290rpm3.15-315rpm/3.5-290rpm3.15-315rpm/3.5-290rpm3.15-315rpm/3.5-290rpm
Thread & Feed
Range of inch thread3/8-28TPI3/8-28TPI3/8-28TPI3/8-28TPI3/8-28TPI
Range of metric threadl-120mm1-120 mm1-120 mm1-120 mm1-120 mm
Range of module Thread0.50-60 MOD0.50-60MOD0.50-60MOD0.50-60MOD0.50-60MOD
Range of Di metrical pitch thread1-56DP1-56DP1-56DP1-56DP1-56DP
Longitudinal Feed0.10-12.0mm/rev.0.10-12.0mm/rev.0.10-12.0mm/rev.0.10-12.0mm/rev.0.10-12.0mm/rev.
Cross Feed0.05-6.0mm/rev.0.05-6.0mm/rev.0.05-6.0mm/rev.0.05-6.0mm/rev.0.05-6.0mm/rev.
Rapid Traverse - Longitudinal3.8m/min.
Rapid Traverse - Cross1.8m/min.
Rapid Traverse - Tool Slide0.9m/min.
Max. Travel of Cross Slide850mm850mm850mm950mm1050mm
Max. Travel of Top Slide300mm300mm300mm300mm300mm
Tool Shank Size45x45mm45x45mm45x45mm45x45mm45x45mm
Tail stock
Taper of tailstock quillMetric 80Metric 80Metric 80Metric 80Metric 80
Travel of tailstock quill300mm300mm300mm300mm300mm
diameter of tailstock quill260mm260mm260mm260mm260mm
Power of Main Motor30 kW30 kW30 kW30 kW30 kW
Power of Rapid Traverse Motor2HP2HP2 HP2 HP2 HP
Power of Coolant Motor0.125HP0.125HP0.125HP0.125HP0.125HP

There are 5 models of extra heavy duty lathe for the same. These imported all geared lathe machines contain dog chucks which are more often known as a lathe carrier. This carrier is used for turning between lathes and centres. Power of Rapid Traverse Motor is 2 HP.

Standard Accessories :

  • Dog chuck
  • Steady Rest
  • Follow Rest
  • Resolving Center
  • Center Sleeve
  • Tool Set
  • Foundation Bolt
  • Instruction Manual