Description
Standard Accessories
- 4 Jaws Independent dog chuck
- Chuck wrench
- Steady Rest
- Follow Rest
- Leveling Iron Pads
- Tool Rest Wrench
- Coolant System
- Lubricating System
- Foundation Bolt
- Machine Lamp
- Manual Book
Optional Accessories
- 3 Jaw Self-centering true chuck
- Quick change tool post
- Taper turning attachment
- 2 Axis DRO
- Key way milling attachment
- Revolving center – MT6
| Model | HSTH 110 |
| Center Height | 550mm |
| Swing Over Bed | 1100mm |
| Swing Over Cross Slide | 800mm |
| Swing in Gap | 1300mm |
| Length of Gap | 300mm |
| Width of Bed | 600mm |
| Max. Weight of Work Piece | 2500Kg |
| Admit Between Centre | 1500 / 3000 / 5000 / 6000 / 8000 / 10000mm |
| Spindle Nose | D-11 |
| Spindle Bore | 105mm |
| Spindle Speed | 18 / 4.8-640rpm |
| Compound Rest Travel | 200mm |
| Cross Slide Travel | 500mm |
| Lead Screw Thread | 12mm |
| Tool Shank Size | 40mm X 40mm |
| Longitudinal Feeds | 64 / 0.05-24.3mm / rev |
| Cross Feeds | 64 / 0.025-12.15mm / rev |
| Rapid Speed of Carriage | 3740mm / min |
| Rapid Speed of Cross Slide | 1870mm / min |
| Metric Thread | 50 / 1-240mm |
| Imperial Thread | 26 / 1-14TPI |
| Diametrical Thread | 24 / 1-28DP |
| Module Thread | 53 / 0.5-120MP |
| Tail Stock Quill Diameter | 90mm |
| Tail Stock Quill Travel | 250mm |
| Tail Stock Quill Taper | MT-5 |
| Rapid Motor Power | 1.1Kw |
| Coolant Pump Power | 0.1Kw |
*Specifications are subject to changed without prior notice.
