All Geared Lathe Machine

Model : 1350, 1650
 Light DutyMedium Duty
Models1350/11350/21650/11650/2
Height for Centres177 mm177 mm215 mm215 mm
Swing over Bed335 mm335 mm410 mm410 mm
Swing over Cross Slide200 mm200 mm250 mm250 mm
Dist. between Centres540100010001500
Movement of cross Slide210 mm210 mm250 mm250 mm
BED
Bed Type2 Flat & 2V2 Flat & 2V2 Flat & 2V2 Flat & 2V
Bed Width230 mm230 mm265 mm265 mm
Main Spindle
Type & Size of Spindle NoseA 2 sizeA 2 sizeA 2 size 4A 2 size 4
Taper Bore in Center Sleeve4MT-44 MT-4MT-4MT-4
Spindle Bore Tail Stock Spindle Diameter42 mm42 mm42 mm42 mm
45 mm45 mm45 mm45 mm
Taper Bore in Spindle SleeveMT-4MT-4MT-4MT-4
Tool Slide Travel of Tool Slide
130130135135
Tool Shank Section16x1616x1616x1616x16
Speeds
No. of Speeds8/168/168/168/16
Range RPM45-938/30-125045-938/30-125045-938/30-125045-938/30-1250
Feeds
No. feeds65656565
Range
Longitudinal feeds per revolution Transverse feeds per revolution0.05 to 0.8 mm / Rev. 0.03 to 0.48 mm / Rev.0.05 to 0.8 mm/Rev. 0.03to 0.48 mm/ Rev.0.05 to 0.8 mm / Rev. 0.03 to 0.48 mm / Rev.0.05 to 0.8 mm/Rev. 0.03 to 0.48 mm / Rev.
Threads No. Range
Inch65/4 to 60 TPI65/4 to60 TPI65/4 to 60 TPI65/4 to 60 TPI
Metric54/0.35 to 6 mm54/0.35 to 6 mm54/0.35 to 6 mm54 / 0.35 to 6 mm
Electricals Main
2 HP3 HP3 HP3 HP
Power Supply3 Phase3 Phase3 Phase3 Phase
Other Data
Gross Weight1000110014001550
Floor Space
Occupied (L x W) Packing Dimension2350x 1100 1750x1000x13002800 x 1100 2200x1000x13002800x 1100 2200x1050x13503350X1150 2750x1050x1350

Standard Accessories :

  • Hardened Guideways
  • Electric Motor
  • R/F Switch
  • V-Belt
  • Inch/mm Change Gears
  • 2 Nos. Dead Centre, Centre Bush
  • Oil Can
  • Set of Alien Keys and Spanners
  • Screw Driver and Instruction Manual

Optional Accessories :

  • D1-4 Camlock Spindle in lieu of A2/4Spindle
  • 16 Spindle Speeds Ranging from 30 to 1250 RPM / 50 to 2000 RPM with super Precision Bearings
  • Starting Third Shaft with instantaneous Foot Brake and Control Panel
  • Electric Coolant Pump with Tank & Fittings, Rear Tool Post with Tool Holder
  • Taper Turning Attachment
  • Rear Splash Guard, Face Plate
  • Steady Rest, Follow Rest
  • Chuck Flange

  • Single Dead Stop for Carriage
  • Micro Meter Carriage Stop
  • 5 Position Carriage Stop
  • Machine Lamp with Control Transformer
  • Quick Change tool Post with 5 Tool Holders
  • Tool Post Grinder (External/Internal)
  • Key way Milling Attachment
  • 4 Jaw Dog Chuck
  • 3 Jaw True Chuck & Revolving Centre
  • Anti Vibration Pads