CDL Series – All Geared Lathe

Model : CDL6236, CDL6241, CDL6251

Features

  • Big Spindle Bore
  • New Design Exterior
  • High Spindle Speed
  • Wide Thread Range
ModelsCDL6236CDL6241CDL6251
Main Specification
Max.Swing over Bed360mm410mm510mm
Max.Swing over Carriage180mm230mm320mm
Max. Swing in Gap590mm640mm735mm
Admit Between Center750mm / 1000mm / 1500mm750mm / 1000mm / 1500mm750mm / 1000mm / 1500mm
Width of Bed300mm300mm300mm
Head Stock
Spindle NoseD6D6D8
Spindle Bore48mm52mm82mm
Taper of Spindle BoreM6M61:20
No.Spindle Speed12 Speeds12 Speeds12 Speeds
Range of Spindle Speed32~2000rpm32~2000rpm16~1600rpm
Thread & Feed
Range of inch Thread2 ~ 56 TPI2 ~ 56 TPI2 ~ 56 TPI
Range of Metric Thread0.5 ~ 14mm0.5 ~ 14mm0.5 ~ 14mm
Range of Module Thread0.5 ~ 14mm0.5 ~ 14mm0.5 ~ 14mm
Range of Di metrical pitch thread2 ~ 56 D.P2 ~ 56 D.P2 ~ 56 D.P
Longitudinal Feed0.06~0.82mm/rev0.06~0.82mm/rev0.06~0.82mm/rev
Cross Feed0.017~0.242mm/rev0.017~0.242mm/rev0.017~0.242mm/rev
Thread & Feed
Taper of Tailstock QuillM4M4M4
Travel of Tailstock Quill150mm150mm150mm
Diameter of Tailstock Quill60mm60mm60mm
Motor
Power of main motor4HP4HP4HP
Power of coolant motor0.125HP0.125HP0.125HP
Weight & Dimensions
Net Weight :750mm1200kg1250kg1600kg
1000mm1350kg1400kg2040kg
1500mm1550kg1600kg2250kg
Dimensions(L x W x H) :750mm2200x1090x2000mm2200x1090x2000mm2200x1090x2000mm
1000mm2450x1090x2000mm2450x1090x2000mm2450x1090x2000mm
1500mm3000x1090x2000mm3000x1090x2000mm3000x1090x2000mm

Standard Accessories :

  • 3 jaw Chuck
  • Steady Rest
  • Follow Rest
  • Center Sleeve
  • Dead center 2 No.
  • Full Length splash guard
  • Coolant system & Tank

  • Machine Lamp
  • Chuck Guard
  • Carriage Guard
  • Pointed nose Oil Gun
  • Instruction Manual
  • Tool Kit

Optional Accessories :

  • 4 jaw Chuck
  • Face Plate
  • Drive Plate
  • Quick change Tool Post
  • Taper Turning Attachment
  • Digital Readout
  • Thread chasing dial
  • Revolving center