Square Hard Guide Way Flat Bed Lathe (C5037B)
Model : C5037B
- Flat Bed Structure and high rigid square guide way suit perfectly well for heavy cutting and ensure the long term accuracy.
- Bed and base are made of high strength cost iron to ensure the high rigidity and high accuracy. The feature of this machine is waterproof and easy to maintain.
- Servo motors drive X, Y & Z axis by flexible couplings and high accurate ball screw. Both side of screw are immobilized to ensure the stiffness for the bearing seat, reduce deformation during heavy cutting.
- Overall guide way protection design and cooling tank, chip host are separated to avoid accuracy changing during overheat cutting.
|Maximum Swing Over Bed||Ø 480mm|
|Maximum Swing Over Solid||Ø 260mm|
|Max. Machining Length Chuck||390mm|
|Spindle Taper Hole||Ø 61mm|
|Max. Bar Diameter with Manual Chuck||Ø 58mm|
|Maximum Bar Diameter with Hydraulic Hollow Chunk||Ø 46mm|
|Maximum Bar Diameter with Hydraulic Solid Chunk||None|
|Spindle Head Type||A2-6|
|Spindle Speed Range||50-2000rpm|
|Spindle Shift Mode||Servo|
|Spindle Rated Torque||49Nm|
|Main Moto Power||7.5Kw|
|Spindle Moto Maximum Speed Range(30 Min)||11Kw|
|Chunk Type||Hydraulic Solid (AUTOGRIP-Taiwan)|
|Chunk Size||Ø 250mm|
|Rapid Traverse Speed on X Axis||6m/min|
|Rapid Traverse Speed on Z Axis||9m/min|
|Servo Motor Torque on X Axis||4Nm|
|Servo Motor Torque on Z Axis||6Nm|
|X Axis Travel||380mm|
|Z Axis Travel||400mm|
|Guide Way Type||Hardened Box Guide Way|
|Turret Type||4 Station Electric Tool Post (Optional 8 Station Tool Turret)|
|Turret Change Time||9071.5-18072.4 - 27073.4-Sec|
|Turning Tool / Boring Bar Size||25mm x 25mm / 020mm|
|Chips Conveyor (Optional)||Hinge Belt|