"C" Type Power Press Machine

POWER PRESS

Technical Specifications

Model		BCP-05	BCP-10	BCP-20	BCP-30	BCP-40	BCP-50	BCP-75	BCP-100	BCP-150	BCP-200
Capacity In Tons		5	10	20	30	40	50	75	100	150	200
Crankshaft Diameter	mm	85	105	123	140	145	118	140	165	190	210
Adj. Stroke Length	mm	38	50	63	76	76	90	100	115	125	150
Adjustment Of Ram	mm	25	25	25	25	25	30	30	35	40	40
Ram Face Size	mm	190 x 100	240 x 114	292 x 127	317 x 140	342 x 152	305x204x483	356 x 229 x 534	407 x 254 x 585	457 x 280 x 610	508 x 330 x 660
Punch Hole In Ram	mm	25	25	32	38	38	38	45	50	55	60
Hole In Bed	mm	63	76	82	89	95	150	175	200	225	268
Bed Size (Left To Right x Front To Back)	mm	355 x 178	432 x 228	534 x 305	585 x 355	635 x 355	508 x 762	560 x 812	685 x 940	735 x 1015	812 x 1220
Bed Thickness	mm	50	58	63	70	76	70	75	75	90	100
Dist. Between Bed To Ram	mm	177	204	254	292	318	330	355	430	480	508
Flywheel Weight	kg	50	70	90	110	150	280	350	450	700	900
Stroke Per Minute	mm	80	80	45	40	40	812	915	990	1117	1220
H.P. Required For Geared(1440 RPM)	hp	1	1.5	2	3	5	60	55	50	45	40
For Ungeared(960 RPM)	hp	1	2	3	5	-	5	5	7	10	15
Floor To Top Of Bed	mm	700	725	750	750	750	762	762	762	762	762
All Over Size (LR x FB x H)	mm	700 x 600 x 1600	800 x 800 x 1900	1000 x 1000 x 2100	1000 x 1100 x 2200	1100 x 1200 x 2400	2490 x 1090 x 1142	2640 x 1168 x 1295	2997 x 1320 x 1525	3098 x 1676 x 1728	3505 x 1930 x 2032
Weight Approximate	kg	350	600	1100	1400	1800	2250	3200	4650	6600	9100

*Specifications are subject to changed without prior notice.

Frame: The frame is of all steel construction, fabricated from rolled steel plates with suitable cross ribbings. The structure is designed for perfectly balanced distribution of stress over the cross section, eliminating deflection and vibration. This results in increased tool and machine life.
Clutch: The clutches are of pin/rolling key-type and well supported with high rigidity. The clutch is made of special alloy steel, while the pin/rolling key is manufactured from W.P.S. / EN24 material and properly heat-treated to ensure trouble-free long life and continuous strokes for mass production.
Crank Shaft: The crank shaft is made of special alloy steel, precisely machined to a grind finish with closed accuracy. It is fitted in bronze bushes for smooth working, longer life, and consistent performance.
Adjustable Stroke: The unique feature of adjustable stroke enables the press to perform all kinds of operations by employing short strokes for blanking and forming operations.